Long nail-hinged Fasteners - Type CL and FLEX


Type CL hinged metal fasteners are available in galvanised iron and non-magnetic stainless steel. They are fastened by means of copper nails having 3,4 mm diameter, which ensure an excellent tensile stress resistance performance.
They are suitable for flat belts as well as with a flexible cable for conveyor belts working on troughing idlers. They can operate with heavy loads in dusty locations and in agricolture. 

They are supplied with connection pins having 3-4 mm diameter, which contribute to contain the rise of the edges.

Specific characteristics

  • High resistance to tensile stress
  • Performances costant over the time, also with heavy and irregular loads


 


Product

 

 

 

 

 

 
Technical Data

 

TypeConveyor Belt Thickness 
(mm)		Minimum Pulley Diameter 
(mm)		Maximum recommended working load  
daN/cm		Hinge Pins Diameter  
(mm)
CL 2-32.0 - 3.060101.6 - 1.8
CL HBL2.5 - 4.070162.0
CL 4-54.0 - 5.080163.0
CL 85.5 - 7.0110183.0
CL 107.0 - 9.0140244.0
     
TypeConveyor Belt Thickness 
(mm)		Minimum Pulley Diameter 
(mm)		Maximum recommended working load  
daN/cm		Flexible Cable Diameter  
(mm)
FLEX 107.0 - 9.0140245.5
     

Accessories recommended for the application

  • Nail Puller Plate AT23 (for CL8)
  • Nail Puller Plate AT24 (for CL10)
  • Rivet Clincher AT13 (for CL8)
  • Rivet Clincher AT14 (for CL10)

Type CL Fastener Technical Data Sheet
Type FLEX Fasteners Technical Data Sheet
Type CL and FLEX Fasteners Installation Instructions

Supply information
CODECONTENT OF 1 BOX
CL 2-3 H 1010 X 1 m Type 2-3 Hinged Fasteners
Ø 2.2 X 15 mm nails
CL HBL H 1010 X 1 m Type HBL Hinged Fasteners 
Ø 2.5 X 15 mm nails
CL 4-5 H 1010 X 1 Type 4-5 Hinged Fasteners
Ø 2.5 X 15 mm nails 
CL 8 H 88 X 1 m Type 8 Hinged Fasteners
Ø 3.4 X 18 mm nails
CL 10 H 55 X 1 m Type 10 Hinged Fasteners
Ø 3.4 X 18 mm nails
FLEX 10 m 28 X 0,5 m Type 10 Hinged Fasteners
Ø 3.4 X 18 mm Nails
m 2.5 Plastic-Coated Stainless Steel Wire Ø 5.5 mm
In this section: